Rainwater tanks 720L to 275800L

Poly Tanks – 720 Litre to 46,400 Litre


Round, Tall and Squat Tank Specifications

The tall round tank is suited for small spaces around suburban homes. These tanks provide good storage capacity, with minimum diameter space requirements. Ranging from 1,500ltr to 10,000ltr capacities these tanks are typically found on large town blocks. The squat tank is suited for sites that require a low water inlet height. These tanks provide excellent storage capacity, are reasonably priced and are well suited to rural properties or large town blocks where you require plenty of water storage.

Product Code

Capacities

Dimensions (m)

Gallons

Litres

Diameter

Height

Inlet Height

T350 Round

330

1,500

1.17

1.62

1.62

TT560 Tall

560

2,550

1.57

1.68

1.51

TT650 Tall

715

3,250

1.57

2.00

1.79

TS910 Squat

920

4,200

2.15

1.37

1.28

TT1100 Tall

1,100

5,000

1.85

2.25

2.05

TS2200 Squat

2,200

10,000

3.05

1.70

1.48

TT2300 Tall

2,200

10,000

2.59

2.31

2.16

T3300 Round

3,300

15,000

3.05

2.44

2.20

TS5000 Squat

5,000

22,500

3.73

2.44

2.12

T6500 Round

6,600

30,000

3.92

2.87

2.68

T8400 Round

8,400

38,000

4.37

2.82

2.71

T10500 Round

10,200

46,400

4.60

3.16

2.95

 

Slimline Tank Specifications

These tanks are perfect for suburban homes that have limited and very limited space. The short length of these tanks is ideal to fit between windows. One or two of these tanks can provide enough water for the garden and/or to wash the car.

Product Code

Capacities

Dimensions (m)

Gallons

Litres

Width

Length

Height

TSL220 Slim

220

1,000

0.60

1.25

1.86

TSL230 Slim

250

1,150

0.62

1.48

1.62

TSL440 Slim

440

2,000

0.70

2.21

2.15

TSL660 Slim

660

3,000

0.81

2.48

2.15

 

For more information and colour options please download the Bushmans Tank Brochure.

Please contact Blackmores Power and Water on 08 8663 2284 for pricing.


Liner Tanks – 23,900L to 275,800L


Tank Specifications

Aquamate has been manufacturing and installing Poly Lined Steel Water Tanks since 1986.

The Maxi Tank range of water tanks is available in a variety of sizes from 23,900 litres up to 275,800 litres.

Each water tank is available to order in Galvanised, Rivergum Green, Slate Grey and Merino Cream.

The tanks are transported to site in ‘flat pack’ form and assembled on site within a single day in most cases.

Maxi Tank

Capacities

Dimensions (m)

Gallons

Litres

Diameter

Height

AM3G052

5,200

23,900

3.7

2.2

AM3G076

7,600

34,400

4.5

2.2

AM3G103

10,300

46,800

5.2

2.2

AM3G134

13,400

61,100

5.9

2.2

AM3G170

17,000

77,300

6.7

2.2

AM3G210

21,000

95,500

7.4

2.2

AM3G254

25,400

115,500

8.2

2.2

AM3G302

30,200

137,400

8.9

2.2

AM3G355

35,500

161,300

9.7

2.2

AM3G411

41,100

187,100

10.4

2.2

AM3G472

47,200

214,700

11.1

2.2

AM3G537

53,700

244,300

11.9

2.2

AM3G607

60,700

275,800

12.6

2.2

Standard Accessories

All Aquamate Maxi Tanks come standard with the following features:

  • 50mm Outlet with Brass Ball Valve
  • 90mm Overflow with pipework away from tank (2 overflows are supplied on tanks over 130,000L)
  • 450mm Diameter Leaf Strainer Inlet in the Roof
  • Padlocked Access Hatch in the Roof
  • Removable Light Duty Access Ladder
  • Colour matched plastic caps over external bolt threads
  • Z450 Corrosion Protection

 

Optional Liner Tank Accessories

Rainsaver Gutter System

All Aquamate Maxi Tanks are supplied with corrugated roofing sheets. This enables Aquamate to offer a unique water catchment system for the roof of the Maxi Tank. Individual ‘Rainsavers’ are placed at the end of each corrugation to collect the rain which falls on the tank roof and filters it into the tank. This highly effective system can increase your catchment area by over 100 square metres (based on the AM3G607 series). In a 500mm per annum rainfall area this means an extra 62,000 litres of precious rainwater that would otherwise fall to the ground and go to waste.

Dust & Vermin Protection

Aquamate can protect your stored water from dust, insects, and frogs by installing a specially formulated, self-adhesive, soft foam strip between the top of the tank wall and under the corrugated roof sheets. This simple but effective option helps insure your precious water is kept clean and pure.

Decorative Fascia’s

Aquamate can enhance the look of your tank with fascia’s that run vertically up the tank wall hiding all evidence of the bolts protruding through the tank wall.

Aquamate can also install a fascia all-round the roof to protect tall animals (e.g horses) from cutting themselves on the edge of the roofing iron. This also enhances the look of your tank.

Fire Fighting Accessories

Aquamate can supply all the components required to comply with State & Territory requirements including:

Water level indicators compliant with Australian Standard 2419.1-2005 Clause 5.4.4.1
Fire Fighting couplings compliant with local CFA or CFS requirements

Preparing for an Aquamate Maxi Tank Installation

The following is important for you and your earthworks contactor to ensure a successful tank installation.

Step 1. Level the Tank Site

  • The site for your new tank must be 2 metres larger than the tank diameter.
  • ¬†Where ever possible the tank should be excavated into natural ground rather than built up on fill.
  • When excavating a site, adequate drainage must be installed where required to ensure when it rains, water is diverted away from the tank.
  • When using fill to level a site, suitable retaining walls must be installed to maintain the integrity of the tank site.
  • The site must be free of sticks, rocks, or other sharp objects. Vegetation or tree roots must be permanently removed from the tank site.
Step 2. Install the Tank Pad

  • The tank pad must be 2 metres larger in diameter than the tank diameter and laid 75mm thick.
  • The tank pad must consist of Crusher Dust of equivalent material which is less than 6mm in diameter. Material greater than 6mm in diameter is not acceptable as it cannot be accurately levelled nor does it compact as required.
  • The tank pad must be clean and free of any debris or vegetation.
  • When the tank pad has been completed, ensure vehicles and livestock do not damage it.
Step 3. Final Preparation

  • When you have completed your tank pad, contact Blackmore’s Power & Water. We will then work with you on an installation date.
  • A few days prior to installation of your tank, position in a pile in the centre of the tank pad the required cubic meters of clean sand. DO NOT SPREAD THE CLEAN SAND – the installation team will spread the sand during the installation process creating a floor of sand inside the tank. Its sole purpose is to protect the tank liner from being damaged so it must be free of any debris, rocks, vegetation or other sharp objects.
  • On the day of installation you will need to organise or have available enough water to fill 10% of the tank whilst our installation team is on site to ensure the liner is positioned correctly inside the tank.
  • On the day of installation you will also need to organise or have someone to advise where the fittings need to be located.

For more information and colour options please download the Aquamate Tank Brochure.

Please contact Blackmores Power and Water on 08 8663 2284 for pricing.